Tagalicious Tags & Tuts

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

You can find his art HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Autumn Sunset by Bits N Bobs HERE
Autumn Temp 2 by Fired by Flamin HERE
Xero Filter-Soft Mood
PhotoEffex-Scanlines
WSL_Mask 84 HERE
Font A Safe Place to Fall for name HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, duplicate and close the orginial.
Delete the credits.
Go to Image, canvas size and change to a size you prefer, I alway set mine to 800 x 800 and resize later.

Resize paper 15 to 90% and apply your mask, delete and merge group, erase the purple that is showing, then duplicate the mask and flip, merge and move below all the template layers.

Paste BNB-AS37, place where you like, then duplicate and mirror and adjust on the other side.

Paste BNB-AS17, place on one side, moving down some, duplicate and mirror.

Paste BNB-AS58 and move to one side, erase any of the green leaves showing, duplicate and mirror.

Select oval one of the template, resize paper 12 to 90%, paste, invert and delete.

Select oval 2 and apply PhotoEffex-Scanlines, width at 1 and noise at 20.

Select oval 3, resize paper to 90%, paste, invert and delete.

Paste paper 15, invert and delete, paste your middle closeup tube, delete and select none.
Change the blend mode to Luminance (L) and apply xero filter-Soft Mood.

Select the circle border, paste paper 12, add noise at 30%.

Resize element BNB-AS35 to 30%, duplicate a couple of times and place where you like them, refer to my tag.
Then on the original again, resize to 20% and place by the one on the right.

Resize BNB-AS9 to 85%, place on the right side below the rounds you just pasted, move below the rounds and take your pick tool and rotate it to the left to your liking.
If above the tube layer, move below the tube.

Take the wordart, move up and over to the left, then select all, float defloat, add a new raster layer, fill with a color of choice, I used #fed2b2, then select none and move below the wordart, add your drop shadow.

Paste and resize your tube and place on the right side below the wordart.

Resize the 2 butterflies to 25%, duplicate and place where you like. Take your pick and rotate a bit on one or two of them.

Add any other elements that you would like, once happy close off any background and merge visible.
Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Nocturne.

You need a license to use this art work. Please do not use without a license.

You can find this art PFD HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Vintage Kit by Far Far Hill
HERE
Xero Filter-Radiance and Porcelain
PhotoEffex-Scanlines
WSL_Mask 84 HERE
Font Mardian Demo HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Resize paper 2 to 23%, paste on your new layer and apply your mask, delete and merge group.

Resize element 005 to 35%, paste on your new layer, click inside with your magic wand, expand by 10, paste paper 3, invert and delete, do not deselect yet.
Paste your closeup and place where you want if, then delete and select none.
Duplicate your tube, mirror and move below the first tube, change the blend mode to overlay or one you prefer.
Apply the Xero Filter-Radiance to your lower tube layer.
Apply PhotoEffex-Scanlines to the paper with the width at 1 and leave all the other numbers as is also.
On the other tube apply Xero Filter-Porcelain.

Paste, mirror and resize your tube, if using the same one I am, I resized mine to 47% and place on the right side.

Resize element 0011 to 15%, free rotate to the left at 15 degrees and place on the left side. Duplicate, free rotate to the right at 90 degrees, flip and move below your tube layer at the bottom. Duplicate again, mirror and move below the picture layer.

Resize element 004 to 15% and place on the left side, move below the tube layer.

Resize element 009 to 10% and place below the flower layer how you would like it, rotate to the right at 10 degrees and erase any part of the bottom you do not want showing.
Resize element 006 to 5% and place on the left next to the other picture.

Resize element 012 to 20%, place at the top of the frame.
Resize element 04 to 4% and place on top of the ribbon.

Duplicate twice and place on the mirror, making them appear to be earrings.

Add any other elements that you would like, once happy close off any background and merge visible.
Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Elisabeth Bell.

You need a license to use this art work. Please do not use without a license.

You can find this art CDO Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Sweet September by Angelaz Creationz
HERE
WSL_Mask 208 HERE
Font PR8Charade HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

This is an easy peasy one.

Paste paper of choice, I used #11, apply your mask, delete and merge group. Resize larger to fit your tag when done.

Paste and resize frame 4 to 55%, click inside with your magic wand, expand by 5, paste paper #11, invert and delete.

Paste element #19 inside the frame and move to the left just a bit.

Resize element #2 to 90%, flip and place at the bottom part of frame.

Paste your tube and place on the right side.

Paste and resize element #33 to 15% and paste on the left side. Back to the original element 33, resize again this time to 10% and place on the left side again.

Resize element #39 to 10%, free rotate to the left at 10 degrees and move below the apple basket layers.

Resize element #30 to 10% and place on the baskets on the left.

Resize element #3 to 15% and place on the right side behind your tube layer.

Resize the red apple to 7% and the green apple to 5%, duplicate them a couple of times and place where you like.
I did the free rotate left at 90 degrees on the red one.

Resize element #36 to 20% and place toward the top, below the frame layer.

Resize element #4 to 7% and place on top of the cider bottle on the right.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Elias Chatzoudis.

You need a license to use this art work. Please do not use without a license.

You can find this art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Feeling Witchy by Angelaz Creationz
HERE
Xero Filter-Soft Mood-Mistifier
EyeCandy4000-Gradient Glow
WSL_Mask 84 HERE
Font Witched HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste paper #1, apply your mask, delete and merge group.

Paste frame #3 and resize to 18%, click inside with your magic wand, expand by 2, paste paper of choice, invert and delete, do not deselect yet, now paste your close up tube, delete, select none.
Move both the paper and tube below the frame layer.

Apply Xero Filter-Soft Mood to your tube, then apply Mistifier, changing the haziness to 150.

Resize element #7 to 10% and place on your frame on the right side.

Resize element #35 to 20% and place by the books on the right.

Paste your tube on the left side of the frame.

Resize element #41 to 20% and place on the left behind your tube.

Resize element #9 to 20% and place on the right side behind the book layer. Resize element #3 to 10% and place on the right side also.

Resize element #47 to 10% and place at the upper right on the frame, apply EyeCandy4000-Gradient Glow in a color of choice.

Paste element #40 just above the mask layer and place how you like it, duplicate and mirror.

Resize element #48 to 10% and place on the left behind your tube layer.

Resize element #33 to 15% and flip, place on the right side below the book and bottle layers. Duplicate, mirror and move back to the right side and move down a little.

Resize element #38 to 30% and place just above your mask layer, duplicate and flip.

Resize element #1 to 10% and place it below the bottles and book layers.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Eugene Rzhevskii.

You need a license to use this art work. Please do not use without a license.

You can find this art PFD HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap Autumn is Almost Here
by SassiDesigns HERE
WSL_Mask 84 HERE
Font Mad Beef HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste paper #20 and apply your mask, delete and merge group.

Paste frame #9 on your new image, resize to 75%, click inside with your magic wand, expand by 3, paste paper #39, invert and delete, select none.

Paste your tube and place on the right side

Paste element #81, move under your tube layer, duplicate and mirror.

Resize element #123 to 40% and place on the right side, below the above layer.

Paste element #106 below this layer on the left side, mirror and move up a bit behind the tube layer.

Paste element #148 and place behind your tube layer.

Resize element #142 to 70%, mirror and place on the left side.

Resize element #2 to 40%, place below the frame layer on the left side of the tree.

Paste element #145 on the left side behind the basket layer, duplicate and mirror.

Resize element #149 to 25% and place up in the tree where you like.

Resize element #16 to 65% and place on the left side where you prefer, duplicate, mirror and move below your tube layer and adjust on the right side.

Add any other elements that you would like, once happy close off any background and merge visible.
Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Ismael Rac.

You need a license to use this art work. Please do not use without a license.

You can find this art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap kit Born To Fly PTU
by HorsePlay's Pasture Designs HERE
WSL-Mask 84 HERE
Toadies Filters-What Are You
Xero Filters-Soft Mood and Mistifier
Font Witched HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper 3, apply your mask and delete, merge group.
Paste EL19 and resize to 85%, click inside with your magic wand, expand by 3, paste paper #3, invert and delete.
Paste your closeup tube and delete, select none.
Apply Xero Filter-Soft Mood and then Mistifier, changing the haziness and strength to 152.

Duplicate the frame, and select the bottom one, apply Toadies Filter-What Are You with both numbers set at 16.
Move below the paper layer of the frame.

Paste El72, resize to 90%, free rotate to the left at 90 degrees, move down to just above the mask layer, move to one side, duplicate and mirror, adjust and merge these two layers together.

Resize El4 to 85% and place on the left side of the frame.
Resize El2 to 85% and place behind the pumpkin sign.

Resize and paste your tube on the right side.

Resize El60 to 50%, mirror and place on the right side behind your tube, duplicate resize to 75%, mirror and place back on the right side.
Duplicate twice and move to the left some, behind your tube layer.

Resize El64 to 75%, free rotate to the left at 90 degrees, place below some of the pumpkin layers, duplicate and mirror and move back to the right just a bit.

Resize El24 to 50%, duplicate 4 more times and place 2 by the pumpkin sign and 3 on the right side, moving them below the pumpkin layers. Take your pick tool and rotate the lower one just a little bit.

Resize El49 to 50% and place on the left side in front of the pumpkin sign.

Resize El6 to 25%, place in front of the candy bag, duplicate and place next to the first one.

Paste El68 just above the frame layer that you applied the Toadies filter to, duplicate, flip and mirror.

Back on the top layer, paste El29 to 40% and place more to the left in front of your tube layer.

Add any other elements that you would like.

Resize your tag first then,
add all copyrights to your tag and your name and merge

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Ismael Rac.

You need a license to use this art work. Please do not use without a license.My license is for when he was with PTE which has now closed

You can find this art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap kit Troubling Bubbling Brew PTU
by HorsePlay's Pasture Designs HERE
WSL-Mask 84 HERE
Font Witched HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper #8, apply your mask, delete and merge group.

Paste El43 and resize to 70%, click inside with your magic wand, expand by 3, paste paper #8, invert and delete, move below your frame layer, now mirror and paste your close up and move to the right side more, delete and now select none.
Change the blend mode to screen.

Paste El47 and resize to 75% and move to the right a bit on top of the frame layer.

Paste El68 on the left side of the frame.
Paste El74 behind the house layer and adjust to your liking.
Paste El38, resize to 50%, place behind the house on the left side and move up a bit, duplicate and mirror, adjust behind the house on the right side of it, then duplicate again and move over more to the right.

Paste El20, resize to 20%, duplicate and place on the right side at the bottom of the house.
Resize El5 to 40% and place on the right side also.
Duplicate El20 again and move to the right side of the pumpkin.

Resize El3 to 30% and place on the left side behind the tree layer and move up so it shows above the house.

Paste El87 and resize to 25%, move below the pumpkin layer on the right, duplicate, free rotate to the left at 90 degree and move over to the left more and move up a layer or so.
Resize El23 to 25% and place in front of the pumpkin.

Paste El19 and resize to 90% and place at the top on the top layer.

Paste El11 on the right side, being on the top layer.

Paste El12 just above the mask layer on the left side, duplicate and mirror.

Paste El36, duplicate a few time and place just above the fence layer how you like them.

Being on the top layer, paste your tube and move it to the left side.
Duplicate your tube, mirror and move down to just above your frame layer and adjust any elements that need adjusting and lower the opacity to 90%.

Paste El34 on the top layer and move toward the top more.

Add any other elements that you would like.

Resize your tag first then,
add all copyrights to your tag and your name and merge

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Alfadesire.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Halloween #4 by Topcats Tagz HERE
EyeCandy4000-Gradient Glow and Glass
WSL_Mask 84 HERE
Font Witched HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste paper #3, apply your mask, delete and merge group.

Paste element #11, then go to Image, free rotate, rotate to the right by 15 degrees. Click inside with your magic wand, expand by 5, resize paper #15 to 75% and paste, invert and delete, move the paper below your frame layer, change the blend mode to soft light.

Paste element #6 and resize to 50%, place at the bottom left of the frame, duplicate, mirror and adjust, duplicate twice again and move to the center. You can readjust later after your tube and other elements are added.

Resize your tube to 65%, if using the same one I am, paste on the left side of the frame, duplicate, mirror, move below the paper layer in the frame and move to the right to your liking and erase the excess outside of the frame.

Paste element #20 behind your tube on the left, change the blend mode to Luminance (L) and free rotate to the left by 10 degrees.

Resize element #14 to 75%, place on the right side, then take your change to target brush and change the color of the hat to this color #a58cbc.

Paste element #13 and resize larger to 130% and place off center. Apply EyeCandy4000-Gradient Glow on the medium setting and color white, width at 3

Resize element #43 to 80%, duplicate and mirror and move both to the left side above the tube layer and place how you like them.

Paste element #26 below the hat layer and place how you like it. Duplicate, resize to 70% and place above the word boo to the left.

Resize element #32 to 50% and place below the word boo in the center and move up a bit, sharpen and add your drop shadow twice.

Resize element #30 to 80% and place below the word boo.
Duplicate it, bring to the top and move to the right by the hat.

Resize element #47 to 40%, move below your tube layer and move toward the top left, change the blend mode to Luminance (L).

Paste element #49 on your mask layer and duplicate once.

Resize element #34 to 40% and place on the hat on the right side.

On the name, I did select, select all, float, defloat, add a new raster layer, expand by 2, fill with black and move below.
Then apply EyeCandy4000-Glass to the top layer of the name and move it over some so the black shows more.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Alfadesire.

You need a license to use this art work. Please do not use without a license.

You can find this art PFD HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap Enchanted Forest
by SassiDesigns HERE
WSL_Mask 83 HERE
Font One Starry Night HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Resize your mask bigger to 125% and paste on paper #13, delete and merge group.

Resize element #65 to 65% and then free rotate to the right at 10 degrees. Click inside with your magic wand, expand by 5, paste paper #13, invert and delete, move below the frame layer.

Resize and paste your tube and move off center to the left.
Paste element #34 behind your tube layer.

Resize element #9 to 85%, mirror and place behind the tube on the left side.

Paste element #168, move below the frame layer on the left side, duplicate, move to the center and lower under your tube, duplicate again and move above the frame layer to the right.

Paste element #78 and place on the right side, just below the grass layer you just added. Duplicate, mirror and move just above the house on the left.

Resize element #40 to 70% and place on the right side, duplicate and mirror.

Resize element #92 to 50% and place on the right side below the pole figure and move it out just a bit.

Resize element #47 to 60% and place at the upper right on top of the frame.

Paste element #95 below the tube layer on the left side and adjust it on the house and tree.

Paste element #76 under your tube layer and move toward the bottom.

Add any other elements that you would like, once happy close off any background and merge visible.
Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Alfadesire.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Halloween #4 by Topcats Tagz HERE
AAAFrames-Foto Frame
EyeCandy4000-Gradient Glow and Glass
WSL_Mask 84 HERE
Font Witched HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 600 x 250, paste paper #3, crop your image.
Apply AAA Frames-Foto Frame, width at 10.

Resize element #49 to 50% and place on the right side of the background.

Resize element #11 to 50%, free rotate to the right at 15 degrees, click inside with your magic wand, expand by 4, resize paper #11 to 50% and paste, invert and delete, move below the frame layer, change the blend mode to Luminance (L).

(Do not deselect yet)

Resize your tube to 40%, if using the same one I am, mirror and paste into the frame on the right side more, delete, select none.
Change the blend mode to screen, duplicate and change that one to hard light.
Close the background off and merge all the other layers together, then reopen the background.

Paste your tube on the left side, resize to 80%.

Resize element #35 to 50% and place on the right side below the frame layer.
Paste elment #37 and lower it down to where you like the looks of it.

Resize element #47 to 25%, place behind the tube layer toward the top more, change the blend mode to Luminance (L).

Paste element #41, then take your target brush and change the color of the hat to this #6a2975, resize to 50% and place on the left side with the hat sitting on the fence pickets.

Resize element #34 to 25% and place on the tree on the right side, sharpen twice.

Resize element #20 to 45% and place below the tree layer and to the right a bit so you can see it, duplicate and move over and down a little bit. Change the blend mode on both to hard light.

Resize element #32 to 25% and sharpen a couple of times and place how you like it.

Merge visible, select all, add a new raster layer, fill with black or color of choice, contract by 2, delete, select none.

Add any other elements that you would like.

Add your name and copyright to your tag.

Do not merge yet, you will be closing off your name layer.

Avator
Open a new image the size that is allowed for your group or forum.
Mine is 200 x 200, copy your signature tag you just did, except close off your name part on it, paste and resize to 85%, mirror and adjust how you like, then merge visible.
Select all, new raster layer, fill with black, contract by 2, delete and merge.

On the name, I did select, add a new raster layer, expand by 2, filled with a lighter color and moved below.
Then apply EyeCandy4000-Glass to the top layer of the name.

Add your name and copyrights to both your tags.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Zindy Nielsen.

You need a license to use this art work. Please do not use without a license.

You can find her art at her Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Fall Ball by Topcats Tagz HERE
This is part of a blog train
Xero Filter- Mistifier
Mask 0172 by Sophisticat Simone HERE
Font Great Vibes HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste paper #7 first, apply your mask, delete and merge group.
Paste paper #6 next, apply your mask again and delete and merge group, mirror and move over to the right just a bit and merge down.

Paste element #14, resize to 85% and move to the top, duplicate, flip and mirror. Duplicate, free rotate to the right, duplicate and mirror, close off your mask layer and merge visible.

Paste your closeup and adjust to your liking, erase any showing outside the frame area. Apply the Xero filter-Mistifier.

Paste your tube and place on the left side.

Paste element #28 on the right side and move toward the top, duplicate and move down more.
Duplicate and mirror, duplicate and free rotate to the left at 90 degrees and place under your tube.

Paste element #54, free rotate to the left at 45 degrees and place between the flowers on the right.

Paste element #16 on the right side from your tube.

Resize element #29 to 50% and place on the right side.

Resize element #15 to 40% and place under your tube by the knees. Duplicate a couple more times and place how you like them, moving below some of the flowers etc.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add your name and all copyrights to your tags.

SIGNATURE TAG

Open a new image 600 x 250, paste paper #6 and crop your image.

Paste your closeup and move slightly to the right.

Resize to 80% and paste element #28 and move to the right side and up, duplicate and move down more.

Duplicate and mirror, duplicate again and free rotate to the left at 90 degrees.

Paste your tube and adjust to your liking.

Resize element #14 to 85% and place below your tube layer and place toward the bottom, duplicate and flip, making any adjustments needed.

Paste element #54, free rotate to the left 45 degrees and place between the flowers on the right.

Resize element #16 to 60% and being on the top layer, place on the right side.

Resize element #29 to 35%, mirror and place on the right side.

Merge visible and apply AAA Frames-Foto Frame
Width at, Opacity at 55, click on the little arrow at the bottom where it says default, and select the Transparent Orange color and then click ok.

AVATOR

Open a new image 200 x 200 or whatever your group or forum allows in size.

Paste your finish signature as a new layer, resize to 85%, mirror and adjust to your liking, merge visible and apply the same frame setting as before.

Be sure to add all copyrights and your name.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

You can find his art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap BCA by Topcats Tagz HERE
Template bc-4 by Tamie HERE
PhotoEffex-Scanlines
Xero Filter- Mistifier
EyeCandy4000-Gradient Glow
WSL_84 Mask HERE
Font Simply Glamorous HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d on your keyboard to duplicate and close the original.
Delete the credits.

Paste paper #22 and apply your mask, delete and merge group.

Select raster 5 of the template, select, float, defloat, paste paper of choice, I used paper #5, invert and delete.
Delete the template layer also.

Select raster 6, paste paper #18, invert and delete, paste element #28 and adjust to the circle.

Select raster 4, apply PhotoEffex-Scanlines
Width at 1 and noise at 25.

Select raster 3 and paste paper #4, invert and delete.

Select raster #2, paste paper #2, invert and delete.

Click on raster 1 of the template the white square, select all, float, defloat, paste your middle closeup tube and adjust so the boobs are the center of attention, invert and delete.
Apply Xero Filter-Mistifier, twice to the tube layer.

Select raster 7 and add noise at 50%. Add a medium white glow to the frame, using EyeCandy4000-Gradient Glow.

On both of the white backgrounds to the wordart, apply noise at 50%.

On the wordart Feel Your, go to Effects, Texture effects, Weave and apply with these settings
1, 5, 1, color white on both and fill gaps checked.
Merge your wordart down to the white background on each one and then move over to the right more.

Resize and paste your tube and place on the left side.

Paste element #13 below your tube layer.

Paste element #48 and place on the upper right side of your tag.

Paste element #57, move to the bottom layer and over to the left, duplicate and move down to the right side.

Resize element #18 to 75%, then free rotate to the left at 20 degrees and place on your tube at the bottom part.

Resize element #19 to 75% and place by the compact.

Paste element #40, place on the right side how you like it, then erase the extra parts you do not want showing, duplicate a couple of times and place where you like.

Resize element #31 to 40% and place by the wordart on the right side, duplicate, mirror and place where you like.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize your tag before you add your copyrights to make sure they can be read easily.

Be sure to add all copyrights and your name.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lorri Kajenna.

You need a license to use this art work. Please do not use without a license.

You can find this art at SATC HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Fast Times by Dreamfulfilled HERE
password is listed on the right hand side
Template 56 by Elegants Inspirations HERE
Xero Filter- Fritillary and Soft Mood
WSL_209 Mask HERE
Font Ma Sexy HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d on your keyboard to duplicate and close the original.
Delete the credits.

Resize paper #2 to 23% and paste, apply your mask, delete and merge group. When you are finish with your tag, take your pick tool and pull your mask out more to show behind the tag.

Select the light green circles on the template, add a new raster layer and fill with #d48728 and delete the temp layer.
Apply the Xero Filter-Fritillary with these settings
5, 30, 30, 30

Merge rect1 and rect 2 together on the template, resize paper 3 to 23% and paste, invert and delete. Delete the temp layer also.

Select the black circle, new raster layer and fill with #f5b130, add noise at 50%.

Gray rectangle, resize paper 3 to 23% and paste, invert and delete.

Lt. Green Circle, resize paper 5 to 23%, paste, invert and delete.
Change the color, go to Adjust, Hue and Saturation, colorize with these numbers
Hue 18, Saturation 255

White rectangle, new raster layer, fill with #8d0e0c, and apply the Xero Filter-Fritillary with same settings as before.

Lt Green Strip, new layer, fill with #d48728

Dark Green Circle, new layer, fill with #9a0803, add noise at 50%.

Select Black Circle, resize your tube if needed, paste, invert and delete, change the blend mode to Luminance (L).
Apply Xero Filter-Soft Mood.

Delete the green square, select the white circle, new layer and fill with #face69, select none.

Resize and paste your tube and move to the right where you like it.

Resize element 11, the flag to 30%, mirror and place on the right, behind your tube layer.

Resize elements (1) 8, 9 and 10, the 3 signs to 25% and place on the left side.

Resize element (2) 8 the car to 40% and place on the left above the tube layer.

Resize element (1) 6 and 7 to 25% and place 6 on the right side below the car layer. Place 7 on the left above the car layer.

Resize element (2) 14 to 40% and place on the right side below your tube layer, duplicate and move up some.
Duplicate again, mirror, duplicate and move up.

Resize your tag before you add your copyrights to make sure they can be read easily.

Add all copyrights and your name.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of VeryMany.

You need a license to use this art work. Please do not use without a license.

You can find this art at SATC HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap Autumn Indulgence HERE
By HorsePlay's Pasture Designs
Template 18 by Dee HERE
Mask 0172 by Simone HERE
Font Coneria Script HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d on your keyboard to duplicate and close the original.
Delete the credits.

Paste paper #8 on the bottom layer, apply your mask, delete and merge group. Take your pick tool to stretch it out to how you like it.

Select the brownish rectangle, paste paper AI-p2, invert and delete, also delete the temp layer.

Select the yellow left rectangle, paste paper AI-p12, place where you like it, invert and delete, do not deselect yet.
Resize your tube to 85%, if using the same one I am, mirror, duplicate and paste, hit delete on the bottom tube, and select none. Now on the top tube, move above the left white frame, green circle and dotted frame and erase any part you do not want showing.

Select the Green Circle, paste paper AI-p8, invert and delete, then paste paper AI-p4, place how you like it, delete, select none.
Change the blend mode to burn and lower the opacity to 85.

Resize AI-E13 to 75% and place on the circle and take your Pick took and pull it until it fits the circle.
Take your Change to target Brush and color it with this color #5a1b10.

Resize AI-E32 to 55% and place on the left side above your tube layer, duplicate and mirror. Rotate the one on the left to 20 degree left.

Paste AI-E59 below the second tube layer and move over and up to your liking, duplicate, mirror, move down and out to your liking.

Paste AI-E33 and resize to 50%, place below the leaves of the template and down some, duplicate and mirror.

Resize AI-E46 to 80%, paste below your tube layer at the top, duplicate and flip.

Resize AI-E4 to 40% and place on the upper right side of your tag.

Resize AI-E58 to 35%, being on the top layer, paste on the right side, duplicate, free rotate to the left at 45 degrees and move to the left side, below the leaves layer.

Paste AI-E36 behind your tube layer on the left and move up just a bit, if the stem is showing at the bottom, just erase that part.

Resize AI-E52 to 75% and place on the left behind your tube, duplicate and mirror and adjust to your liking.

Be sure to go back and adjust your mask to show more, using your Pick tool.

Add any other elements that you would like, once happy close off any background used and merge visible.

Resize your tag before you add your copyrights to make sure they can be read easily.

Add all copyrights and your name.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

You can find his art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap Steampunk Girl by SassiDesigns HERE
Xero Filter- Radiance
Mura Meister-Copies-Encircle
Unplugged Tools-Interlace
WSL_208 Mask HERE
Font Time to get a Watch HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 can resize later, I like room to work.

Paste paper #12 and apply your mask, delete and merge group.

Resize frame 9 and 11 to 75%, paste frame 11 first then frame 9, take your magic wand, click inside, expand by 2, paste paper 12, invert and delete.
Do not deselect yet, copy your closeup tube, hit the delete key on your keyboard, select none.
Apply the Xero Filter-Radiance to your closeup. Then apply Unplugged Tools-Interlace with these settings, twice
10, 25, 1, 0

Resize element 34 to 40%, apply Mura Meister-Copies-Encircle and paste below the paper layer of the frame.

Resize element 4 to 55% and apply Mura Meister-Copies-Encircle, move just above the mask layer.

Being on the top layer, resize your tube to 85%, if using the same one I am, paste on the left side.

Resize element 7 to 55% and place at the bottom part of the tag, behind your tube layer.

Resize element 47 to 50% and place at the bottom of the frame.

Resize element 71 to 40% and place at the bottom below the glasses and over to the left, duplicate and move it up and over to the left more.

Paste element 38 just above the mask layer, on the upper right side, duplicate and mirror.

Resize element 86 to 50% and place on the lower right side.

Resize element 60 to 40% and place on the upper right side of the frame.

Resize element 2 to 20%, place on the upper left side by the tube, sharpen once.

Resize element 59 to 40%, place at the bottom below the glasses on the right side.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize your tag before you add your copyrights to make sure they can be read easily.

Be sure to add all copyrights and your name.

Hope you enjoyed doing this tut.

Hello everyone

All tuts are on hold at this time...

There are things in Real Life right now that

needs my full attention....

Hope to return at some point.

Thanks everyone...

Hugsssssssss Sharonc

I would like to take this time to wish everyone a very
Merry Christmas and a Happy New Year.

I am looking forward to a New Year.

May the New Year bring
Peace, Happiness and good health to everyone.

Hugs

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Tatyana Haustoua.

You need a license to use this art work. Please do not use without a license.

You can find this art at AIL HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap My Life, My Moments HERE
By HorsePlay's Pasture Designs
Mask 33 by Brutal Designs HERE
xero Filter-Soft Mood and Porcelain
Font of choice, I used Ma Sexy

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, can alway resize later.

Paste El33, resize to 80%, then duplicate, free rotate to the right at 90 degrees and move below the first frame.
Move the top frame to the left some, adjust your second frame, then erase the part that is showing in the top frame, merge visible.
Take your free hand selection tool and draw around both frames, paste paper of choice, I used P16, invert, delete and select none. Move the paper layer below the frame layer.

Take your free hand selection tool again and go around the frame on the left side, paste your closeup, invert, delete and select none. Making sure the tube layer is below the frame layer.
Apply the xero filter, soft mood, then the Porcelain filter.

Being on the top layer now, apply your tube.

Now being on the bottom layer, paste paper P5, apply your mask, delete and merge group, duplicate the mask, mirror and flip. You will need to move them both around to your liking, then merge the two mask layers together.

Being back on the top layer, resize the wordart to 90% and place toward the bottom of your tube. Apply a gradient glow with this color #f4e7cc or color of choice.

Paste El37 and resize to 85% and place by your tube on the right side, sharpen once.

Paste El52 on the left side at the top of the frame, resize to 65%, duplicate, mirror, flip and adjust as needed, then merge down.

Paste El29 on top of the leaves layer.

Resize El28 to 40%, free rotate to the left at 40 degrees, place on the right side below the tube layer, duplicate, resize again to 40%, mirror and place on the right side lower. Duplicate and move over to the left side where you prefer.
Duplicate however many times you would like and place how you would like.

Resize El26 to 85% and place toward the bottom of the tag and move to the bottom layer.

Paste El54 just above the mask layer, duplicate, mirror and flip.

Resize El16 to 50% and place above the bubble layer and move toward the left side, duplicate and mirror.

Resize El41 to 95%, place under the tube layer and adjust to your liking.

Paste El24 below the paper layer of the frame and adjust to your liking, I moved it more behind the left frame. Then duplicate, mirror and flip.

Resize El12 to 35%, place on the left side lower part of the frame, duplicate and move to the right side, below the tube layer at the top area.

Add any other elements that you would like, once happy close off any background used and merge visible.

Resize your tag before you add your copyrights to make sure they can be read easily.

Add all copyrights and your name.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Victoria Fox.

You need a license to use this art work. Please do not use without a license.

You can find this art at Up Your Art HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Sweet Valentine by Disyas Digitals Designs
You can find at Scraps From The Heart HERE

Template 006 by LuckyStarScraps HERE
WSL_Mask 84 HERE
Font of choice, I used Ma Sexy

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the D key to duplicate and close the original.
Delete the credits.

Paste paper 14, apply your mask, delete and merge group, move to the bottom layer and use your pick tool to pull it out to the size you like for your tag later, or you can use the resize by going to Image and then resize, whatever works best for you.

Paste element 83 and move to the right side to your liking.
Duplicate and move to the left side and down some, erase some of the bottom part.

Select layer A of the template, select all, float, defloat, paste paper 2, invert, delete and delete that layer of the template.
You will do this on each layer when you add a paper layer.

Add noise at 100% on the AA layer of the template.

Move layer C down one, then merge with layer B and apply PhotoEffex-Scanlines, width at 1 and noise at 25.

Merge CC layer down with BB layer and add the same noise again.

Apply the PhotoEffex to layer D of the template at the same settings as before, then sharpen once.

Merge the 3 F layers together.

On the E layer, go to Effects, Texture Effects and Weave with these settings
1, 5, 1 with gaps checked and both colors on white.

On the EE layer, add noise at 50%.
On the EEE layer, paste paper 14, invert and delete.
On layer EEEE, add noise at 50%.

On the G layer add the weave again at the same settings as before.

GG layer add noise at 50%.
GGG layer, paste paper 6, invert and delete.
GGGG layer add the noise with the same 50%.

H layer add the Weave at the same settings as before.
HH add the noise at 50%.
HHH add paper 2, move to your liking, then invert and delete.
HHHH add noise at 50%.

On layer l and lll add the noise again at 50%.
On layer ll add the weave as before.
On layer llll add paper 6, invert and delete.
Add noise to layer lllll.

Paste your tube and resize to 90% if using the same tube I am and move to the right side.
Paste element 86 and move to cover the edge of the legs on the tube.

Paste element 6 and resize to 65% and place more to the left side.

Paste element 13 and resize to 55%, place on the left side below the bear layer.

Paste element 80, move to just above the wordart on the left, duplicate, mirror and adjust.

Paste element 15, resize to 50%, free rotate to the left at 10 degrees and place on the left below the cupcake layer.
Duplicate, mirror, move below the ribbon layer and down some, erase part of the stem showing below the ribbon, duplicate again and move over by the cupcake and adjust to your liking.

Resize element 12 to 35%,place in front of the bigger cupcake and to the left, duplicate, move below the bear layer and place how you like.

Add any other elements that you would like, once happy close off any background used and merge visible.

Resize your tag before you add your copyrights to make sure they can be read easily.

Add all copyrights and your name.

Hope you enjoyed doing this tut.

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Rachael Tallamy.

You need a license to use this art work. Please do not use without a license.

You can find this art at Up Your Art HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Hopelessly In Love by HorsePlay's Pasture Designs
You can find it at Scraps From The Heart HERE
WSL_Mask 84 HERE
Font of choice, I used Katy Berry

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, can resize later.
I like alot of room to work on.

Paste paper 1, apply your mask, delete and merge group.
Adjust as needed once the tag is done.

Paste El42, then take your free hand selection tool and draw around the frame, paste paper 13, invert and delete, move below the frame layer, select none.

Resize El69 to 50% and place on the paper layer in the frame.

Paste El 61 below the paper layer of the frame and move toward the bottom, duplicate, flip and mirror. Do any adjusting that is needed.

Paste El 48 on one side, duplicate, mirror and adjust to your liking.

Being on the Top layer now, paste the tube sitting on the bench, if using the same one I am using and move it toward the left side.

Resize El 11 to 75% and place on the right side of the frame.

Paste El 20 on the left side below the tube layer and position on the frame, refer to my tag.

Paste El 29 on the right side, duplicate, mirror, free rotate to the right at 40 degrees and again adjust to your liking.
Erase any part you do not want showing.

Resize El13 to 35%, place on the right bottom side, duplicate, resize this one to 75%, duplicate two or three times and place where you like on the tag.

Resize El2 to 50%, place on the left side below the flower layer.

Resize El 21 to 50% and place by the bench leg on the left side. Resize El22 to 50% and free rotate to the right by 40 degree and place behind El 21.

Add any other elements that you would like, once happy close off any background used and merge visible.

Resize your tag before you add your copyrights to make sure they can be read easily.

Add all copyrights and your name.

Hope you enjoyed doing this tut.

Beautiful Autumn PTU

I'm Beautiful FTU

Apple Delight FTU

Being Witchy FTU

Autumn Blessings PTU

Pumpkin Patch This Way PTU

Double Troubling PTU

Witch is In FTU

Creatures of the Forest PTU

Witch Is In Forum Set FTU

Autumn Cutie 3 Piece Set FTU

Feel Your Boobies FTU

Let's Race FTU

Autumn Indulgence PTU

Steampunk Girl PTU

MIA

Merry Christmas and Happy New Year

My Life, My Moment PTU

Sweet Love PTU

Hopelessly In Love PTU